Kohzu

Inelastic Measurement

<KIG-20B>

This base table is equipped with XY-carriers which allow smooth translations of heavy goniometers and other equipment in the horizontal plane. There are additional smaller carrier tables for positioning of light equipment such detectors along Xray beam. The carriers are guided by linear rail guides. The carriers can be locked into desired positions by mechanical clamps. The top table can be rotated in a horizontal plane by pushing screws around the vertical pivot. Tilt and height alignment of the whole structure can be done manually by
adjustment bolts at the top. Photo shows KIG-20B with two KTG-11KW & KHI-7 and one RSG-7B & KHI-4SK assemblies mounted on the carriers.

-

#Optical Table

Refer unit page

-

## Slits

Refer unit page

-

High-Load XZ Stage

<KHI-4SK>

This KHI-4SK is consists of the Z stage as KHI-4S and X stage. It can translate to a position precisely while carrying a very heavy duty goniometer on it.

Two Axis Rotation

<RA20-21>

This two axis ( θ-2θ ) motorized rotation stage allows rotation independently of a sample with either a detector or analyzer mounted on a side arm.

High Precision Goniometer

<KTG-15D>

Kohzu's KTG-15 goniometers were specifically developed for use at high energy X-ray synchrotron facilities where precision angular displacement and
repeatability are essential. The goniometer's extreme resolution is attained by displacing a rotation spindle fitted with a long radially mounted arm, via a tangentially positioned and motorized micrometer head.

Ultra High Precision 2-Axis Goniometer

<KTG-11KW>

This goniometer has two parallel ultra high resolution rotation axes driven independently by two tangent bar mechanisms.

The goniometer was manufactured for use in high precision two crystal topograph set-up.

Ultra High Precision Coaxial Goniometer

<KTG-16W>

The device was manufactured for use as a high resolution 4-crystal asymmetric reflection monochromator.

The right picture shows it is installed in a chamber as a low vacuum type.