Content
Motor Controller Lists
Please, Click the each product's picture for detail information.
| Model | SC-021 (NEW) | SC-210 | SC-410 | SC-800/SD-800 (BTO product) |
| appearance |  |  |  |  |
| number of axis | 2 | 2 | 4 | 8 |
| number of axis at once | 2 | 2 | 4 | 4 |
| Power Requirement | AC90～125V, 50/60Hz | AC100V～115V, 50/60Hz (FS: AC90V～240V) | ||
| controllable stages | motor rating bellow 0.75A | all standard stages | all standard stages | all standard stages |
| driver | micro-step system | |||
| micro-step driving | 16 ways | |||
| interpolation function | 0 | 0 | 0 | 0 |
| computer interface | RS-232C | RS-232C, GP-IB | RS-232C, GP-IB | RS-232C, GP-IB |
| handy terminal | RC-010 | SC-200HJ | SC-200HJ | SC-200HJ |
| scaler counter | equipped | equipped | ||
| trigger output | enable | enable | enaible | |
| Price(JPY) | ￥155,000
|
￥350,000
|
￥545,000
|
￥1,000,000
|
| Quantity | ||||
| Add To RFQ List | ||||
Remote Control Guide
To control the stage using a computer, connect the motor controller directly to an RS-232C interface or connect it to a GP-IB board mounted in the computer. If a sequencer is used, the sequencer can be connected to the motor controller through the RS-232C unit. With the RS-232C connection, the communication speed is slow but the system can be configured at a lower price. With the GP-IB connection, the price is higher but the communication speed is faster and connecting to other control devices is easier.
Motor Controllers / Interpolation Driving, Velocity Features, Home Positioning
Interpolation driving
Linear interpolation control mode allows synchronized motion of the object in space along the shortest path a straight line connecting the start and end points.
Velocity Profile
Motor controller SC series are available to chosen trapezoidal and S-curve drive. In addition, acceleration and deceleration drive can be set asymmetric.
In the Trapezoidal drive mode: start at an initial speed, linearly accelerate, move at a target speed and again linearly decelerate when nearing the target stop. In the case of an asymmetric trapezoidal drive, the gradient in acceleration differs from that of deceleration. In the Scurved drive mode: start at an initial speed, accelerate and decelerate along a parabolic curve, which provides smooth, shock-free motion. The asymmetric S-curved drive mode provides separate settings for acceleration and deceleration.
Selection of Home Position Return Mode
Fourteen (14) types of Home Position return can be selected depending on the combination of sensor used.
