Kohzu

SC-210 / 410 / 800

We kohzu will provide the SC-210 and SC-410 from 1st September 2009.

SC-210 / 410 / 800 are motor controllers with built-in micro-step drivers.
These controllers provide high performance at low cost. Motorized stages
can be controlled easily with using front panel joystick and personal
computer.

Features

• RoHS directive compliant (SC-210, SC-410)
• World wide voltage compatible, AC100-220V +/-10% (SC-210, SC-410)
• Two (2), Four (4) and Eight (8) axis control
• Maximum 250 divide Micro-stepping as a standard feeding mechanism
• Various velocity features
• Interpolation driving of two (2) and three (3) axis.
• Closed loop control
• Trigger output
• Scaler counter function (SC-400, SC-800)
• RS-232C, GB-IB interface
• Joystick

Maximum 250 divide Micro-step as a standard feeding mechanism

Motor controllers are equipped with a built-in micro-step driver. Smooth
and low-vibrational driving, and high precision positioning is achieved.
Sixteen (16) ways and maximum 250 division number setting is
available.

Velocity Profiles

Motor controller SC series are available to various type acceleration and
deceleration drive. Velocity Profiles are available to chosen trapezoidal
and S-curve drive. In addition, acceleration and deceleration drive can be
set asymmetric.

Linear interpolation in two (2) or three (3) axis

Linear interpolation control mode allows synchronized motion of the
object in space along the shortest path a straight line connecting the
start and end points.

Encoder input, Closed loop control

Closed loop control is possible for stages equipped with a measurement
sensor as like a linear scale. The electronics of controller can then
correct any deviation between the desired and actual position, thereby
improving accuracy.

Trigger output

Triggers synchronized to a motor can be output to an external measuring
instrument (SC-400, SC-800).

Scaler counter function

In optical experiments, collection of intensity pulse signals can be
controlled and synchronized to a motor. (SC-400, SC-800)

RS-232C and GP-IB interfaces

RS-232C and GP-IB interfaces are both provided in the standard
specification

Standard joystick are provided.

Highly operable analog joystick have been adopted. Fine position
adjustment can be easily performed manually. Since external joystick
can be connected, operation can be controlled from the operator's
location.

*SC-800 is 8-axis motion controller and SD-800 is 8-axis motion drivers in a box.These products is coneected each other with separate cables.