Content
Three-Color LCD Panel Pasting Unit VKM-26
This system attaches three channel RGB LCD panels to an optical block using three six-axis manipulators. A test pattern for adjustment that is projected on the screen is captured by five CCD color cameras (four near the perimeter, one at the center), and the image is loaded into the frame memory inside the image processing unit. Image processing calculations are performed by the CPU for each camera and the positions of the LCD panels are automatically adjusted. Then the LCD panels are adhered to the optical block by UV bonding by means of a UV irradiator.
- Manipulator Mechanism Unit
- Appearance of Instruments
Specifications
Panel Size | From 0.55 inch (Actual Showing at March,2004) | |
Irradiation Method | Transmissive type or reflection type | |
Bonding Method | UV bonding or soldered joint | |
Detection Accuracy | Registration: 1/20～1/50 picture element degree Focus: <10μm Note: Depend on the User's condition, tact et al. | |
Detection Method | Image processing method (Five point in total: Four point in corner and one point in center) | |
Adjustment Time | About two minutes (exclusive of bonding time) Note: Depend on the User's condition, accuracy et al. | |
Lens Method | Master lens method or product lens method | |
Panel Chuck | Manual or motorized | |
other | Each parameters can be set freely by user which includes bonding time, adjustment accuracy, field angle adjustment factor, offset adjustment factor et al. Inspection of complete product and that of data processing. Data transfer function to host-computer. | |